WHAT IS IT?
A unique multi-layered vibration damping material with bitumen-mastic base and aluminum foil outer surface. This material is equipped with self-adhesive glue layer.
WHAT DOES IT DO?
The multi-layered structure and the thickness of this material provide for the ultimate low-frequency vibration damping. This material is water-proof and once applied provides good defense against corrosion preventing any water and oxygen from coming in contact with chassis.
AREAS FOR APPLICATION:
Passenger compartment floor, Boot floor, Front board inside the passenger compartment, area near transmission, rear wheel arches (inside passenger compartment).
Material could be heated up using a heat gun to ensure it is soft enough to ease application. The surface needs to be dried and cleaned of any dust, grease and oil before application. Self-adhesive layer will ensure tight grip to the chassis.
Mechanical loss factor: more than 0.4
Thickness: 4.2 mm
Foil thickness: 100 micron
Weight: 6 kg / m²
Flammability: 100 millimeters / minute
Working temperature range: -45°C to +80°C
Water resistance: does not absorb moisture
STP BOMB BULK SOLUTION = 5 sheets x 0.53 m x 0.75 m (1.988 m²)
Vehicle noise sources:
1. Engine noise: It is generated when the car is bad seal during the normal operation
4. Mechanical aging: As the loosed mechanical components, the noise will occur during operation
The noise-proof damping mat advantage:
1. Effective noise elimination will give you a quiet driving space during driving
2. Strengthen the car body: The car body will be more stronger. If it installs the noise-proof mat as the car body cover, doors , back-up cabin, roof, fender are relatively weak.
3. Optimize stereo sound: The stereo can lead the trunk vibration and as car’s structure can not
withstand the bass impact, so the “creak” sound will be occurred. The noise mat will make the sound more clear, vigorous.
- PAYPAL OR CREDIT/DEBIT CARD VIA PAYPAL (IMMEDIATE CLEARANCE)
- ELECTRONIC BANK TRANSFER (1 DAY CLEARANCE, DEPENDING ON YOUR BANK)
- DIRECT BANK DEPOSIT INTO OUR ACCOUNT – OVER THE COUNTER (IMMEDIATE CLEARANCE)
- PERSONAL OR BUSINESS CHEQUE, OR MONEY ORDER (UP TO 10 DAYS CLEARANCE FROM THE RECEIPT OF THE CHEQUE)
SHIPPING & RETURNS POLICY
Normal delivery times for items in stock are 1-3 working days from payment clearance to Metro areas, except Perth and Darwin where delivery may take up to 5 working days. These timelines are guidelines only. STP Solutions Australia does not take any responsibility for any delays in shipping. Where possible we provide consignment details and courier tracking numbers to customers (in the order status), so please contact the corresponding courier to track your shipments. You should check the Order History on the Order Information page accessible from the My Account area for information on your order.
LOSS AND DAMAGE
Shipping Insurance – Shipping Insurance is available for your goods, and must be specified when you are ordering. Insurance is optional and charged at 2% of the value of goods. We strongly recommend insuring your goods against transit damage.
Signing for Delivery – The customer is responsible for ensuring that either they or their authorised representative inspect the goods prior to accepting the delivery and signing the Proof Of Delivery (POD) document. Each delivery should be checked for completeness (i.e. Enclosed goods as per accompanying Consignment Note) and any transit damage. Failure to inspect the goods prior to signing the POD will result in voiding of any insurance against loss or transit damage.
Signing of a Proof of Delivery (POD) document confirms that the consignment has been delivered in full and in good condition (i.e. no visible physical damage). POD should only be signed once the goods have been inspected as a clean signed POD will void any insurance against loss or transit damage.If a shipment arrives with a damaged carton or item, the delivery should either be rejected with POD not signed or the POD must have the exact damage noted on it including any carton identifier available, signature, name and date as above. If this information is not provided the POD will be treated as clean and will void any ability to claim loss or transit damage against shipping insurance.ADDITIONAL FEES AND CHARGES If we incur extra delivery charges as a result of your action or inaction, these may be passed on to you at our discretion. An example of such charges are second delivery charges by couriers as a result of you or someone who can receive the goods not being in attendance at your nominated delivery address when you have specified that the address is attended during normal business hours.
REFUND AND RETURN POLICY AND RETURN POLICY
No part of the Refunds and Returns Policy is intended to limit any rights or remedies customers may have under the Australian Consumer Law (ACL) or equivalent State and Territory legislation.
All products sold by STP Solutions Australia are covered by a Return-to-Base Warranty. Most of the goods carry 12 months return-to-base warranty, but some could have extended warranties, this will be stated in the product description.
Terms and conditions are subject change from time to time without prior notice. It is your responsibility to review the terms and conditions prior to placing orders on the website.